CMI QUICKSET 300

(PLASTICIZING ACCELERATOR ADMIXTURE)

ADVANTAGES

  • Consistent Quality
  • Minimizes Cracks
  • User Friendly
  • Water Resistant
  • Enhanced Workability
  • Cost Effective
  • Optimum Bond Strength
  • Cleaner Worksite

PRODUCT

CMI QUICKSET 300 is a mortar plasticizing accelerator admixture for use in concrete / mortar mixes. When added, it accelerates cement hydration with improved workability resulting in shortened setting time and increased early strength.

It provides the following advantages when used :
- Reduces initial setting time.
- Increases early strength of concrete.
- Minimizes shrinkage.
- Reduces water to cement ratio.
- Improves compressive strength.

TECHNICAL DATA

Colour : Brown
Form : Liquid admixture
SG. : 0.99 – 1.01
Drying time : 30 minutes – 1 hour.
Packing : 4 litres, 20 litres & 210 litres.

APPLICATION PROCEDURE

Gauging water to cement, sand aggregates ratio should be reduced by approximately 10 to 15 %.

CMI QUICKSET 300 should be stirred well and added into the gauging water at the rate of 500 ml per 50 kg bag of cement.

* Technical references are available upon request.

STORAGE

Storage life is approximately 12 months if product is stored in a cool and dry place.

Note : Because it is not possible to give specific instruction for the various site conditions or to control the applications, the information on here is for general guidance only and does not constitute an offer of warranty by the manufacturer.

Next Product:

Previous Product: