CMI MEDIUM EASY RENDER 082

ADVANTAGES

  • Consistent Quality
  • Minimizes Cracks
  • User Friendly
  • Water Resistant
  • Enhanced Workability
  • Cost Effective
  • Optimum Bond Strength
  • Cleaner Worksite

PRODUCT

CMI M. EASY RENDER 082 is a high quality polymer modified cement/sand render for application on block walls, brick walls and concrete substrates. For application on smooth concrete substrates, a key primer coat with CMI MULTIFIX 188 is recommended for roughening of the receiving surface prior to plastering.
CMI M. EASY RENDER 082 can be used for patching and repairing works on concrete and is specially designed for hollow-block wall plastering in interior or exterior applications.

TECHNICAL DATA

CoIour/ Binder : Grey/ Portland Cement.
Filler : Graded silica sand.
Aggregate size : 1.5mm max.
Additives : Water soluble polymeric fibre additives for workability & open time.
PH. : 12.
Potlife : 1 hour.
Density : Dry ± 1.7 kg/ litres ; Wet ± 1.8 kg/ litres.
Coverage : Approximately 1.6 kg/ m2 / mm thick.
Recommended thickness: Between 5 to 10 mm.
Mixing ratio : Approximately 19 % water on dry material.
Packing : 40 kg.

APPLICATION PROCEDURE

Add a 40kg bag of CMI M. EASY RENDER 082 into approximately 7.6 litres of clean water. Remove all loose particles, grease and foreign materials from substrate. Dampen the receiving surface if necessary. Mixing can be done manually or by an electric mixer for about 5 minutes. Mixture must be used within 1 hour.
CMI M. EASY RENDER 082 should not be used on painted surfaces and should be cured with water spray for the first 2 days in hot and dry conditions.

STORAGE

Storage life is approximately 6 months if stored in a cool and dry place.

Note : Because it is not possible to give specific instruction for the various site conditions or to control the applications, the information here is for general guidance only and does not constitute an offer of warranty by the manufacturer.

Next Product:

Previous Product: