CMI LATEX ADMIX 350

(LATEX EMULSION ADMIXTURE)

ADVANTAGES

  • Consistent Quality
  • Minimizes Cracks
  • User Friendly
  • Water Resistant
  • Enhanced Workability
  • Cost Effective
  • Optimum Bond Strength
  • Cleaner Worksite

PRODUCT

CMI LATEX ADMIX 350 is a high performance latex emulsion admixture formulated for a wide range of uses. It improves cement hydration, adhesion, durability, bond strength and reduces water impermeability when used with cement/ sand mortars and cement based adhesive.

CMI LATEX ADMIX 350 is especially suitable to mix with CMI TILEFIX 181 to replace gauging water for enhanced adhesion strength even under damp interior and exterior applications.

TECHNICAL DATA

Base Material : Modified synthetic latex.
Colour : Milky White.
Form : Emulsion.
PH. : Approximately 9.
Density : 1
Health : Non—toxic. Prevent from contact with eyes or swallowing.
Packing : 4 litres, 20 litres & 210 litres.

APPLICATION PROCEDURE

The substrate for application must be clean & sound, free from dirt, grease, oil, dust and loose particles. Stir or shake container well before use. Pour approximately 6 litres CMI LATEX ADMIX 350 into a clean pail, then add in 25kg CMI TILEFIX 181 . Mix thoroughly, either manually or with an electric mixer until a slump free mortar adhesive is obtained for tiling use. As a bonding primer, use neat or 1 part latex to 1 part OPC / cement adhesive. As a general purpose admixture, use 1 part latex to 2 parts water and add in cement tile adhesive or cement / sand.

* Technical references are available upon request.

STORAGE

Storage life is approximately 12 months if product is stored in a cool and dry place.

Note : Because it is not possible to give specific instruction for the various site conditions or to control the applications, the information here is for general guidance only and does not constitute an offer of warranty by the manufacturer.

Next Product:

Previous Product: